marklin Central Station 60215, User Manual, Page: 12 / 36

48
Changing CVs (Parameters)
!
Please note that not every locomotive supports all functions and characteristics. Please refer
to the instructions that came with your locomotive. There you will fi nd information regarding what
functions and characteristics the locomotive‘s decoder supports.
Confi guring a Locomotive
Adding to / changing symbols, functions, and settings. This function can be used for all types of
decoders. However, only those settings and functions available on the computer can be processed.
In the example of a locomotive with an mfx decoder we are showing you the multifaceted possibilities
for these settings.
The locomotive to be processed should
be called up on one of the two control-
lers. Then go with this locomotive to
the confi guration mode as shown here.
Function Symbols 0-7
Function Symbols 8-15
Add Shuttle
Train Route
Button for Resetting the
Locomotive Decoder
Change Deco-
der CVs
In the confi guration mode there are additional icons available for the supplementary setup of the
locomotive.
Send data
to locomotive
Write data to
locomotive card
You now have the possibility
of doing changes. For example,
adding an appropriate icon.
Confi rm.
Select.
Here, you have the possibility of
assigning a shuttle train route.
Enter the contact from the
S 88 feedback module in the
fi eld to which it belongs and
set the maximum speed and
the waiting period.
Deletion of the shuttle train route for this locomotive
Confi rm.
Adding a Shuttle Train Route