2.3 Setting the Running
Characteristics
1. Removing the front hood
(=> Page 40)
2. You can change the locomotive’s
running characteristics by changing
the settings for the potentiometers
on the lower circuit board. These
potentiometers have a stop at the
end positions. When you encounter
resistance when turning the “pots”,
do not try to turn them further with
force.
P1: Acceleration/braking delay
(together)
Left stop:
minimum delay
Right stop: maximum delay
P2: Maximum speed
Left stop:
lowest maximum speed
Right stop: highest maximum speed
Important:
Do not confuse the two potentio-
meters for setting the running
characteristics on the lower digital
circuit board with the potentio-
meter for adjusting the volume of
the sound effects on the upper
circuit board.
18
2
Operation
P2
P1
Summary of Contents for baureihe V 60
Page 1: ...Baureihe V 60...
Page 3: ...1 Vorbild...
