2
13
Operation
2.6 Sound Effects Circuit
Turning the Sound Effects
Circuit On
Setting the Volume
Circuit in the tender
Caution! Do not confuse the locomo-
tive decoder (below) with the sound
effects circuit (above)!
Coding Switches on the Sound
Effects Circuit
Factory Settings:
Switch
1
2
3
4
5
6
7
8
Setting On On On On On Off On
On
Switch at off
Must never be set at “off”!
Must never be set at “off”!
Automatic shutoff deactivated.
Additional sound effects not activate.
Must never be set at “off”!
Setting for locomotives with round
slide valve.
The same sound effects of the locomotive
in operation, regardless of its operating
status.
Reproduction of only 2 exhaust strokes
per wheel revolution (for operation of the
locomotive at very high speeds).
No.
1
2
3
4
5
6
7
8
Switch at on
Must always be set at “on”!
Must always be set at “on”!
The sound effects are turned off after a few
minutes as long as the locomotive is at a
standstill and all (!) functions are shut off.
Different additional sound effects
(air compressor, work sounds of the fire-
man, etc.) activated.
Must always be set at “on”!
Tyical flat slide valve noise can be heard
during coasting.
Reproduction of different sound effects,
depending on the operating status of the
locomotive.
Reproduction of 4 exhaust strokes
per wheel revolution (the same as the
original).
Possible Settings
Summary of Contents for baureihe 55
Page 1: ...Modell der Baureihe 55...
