2.5 Operation with the Various
Power Systems
2.5.1 Digital / Delta Operation
Suitable central unit for digital opera-
tion: Märklin 6021 Control-Unit.
Important:
Required setting for the coding
switches on the back of the
Control-Unit:
Switch:
1
2
3
4
Variation 1:
on
on
on
off
Variation 2:
off
on
off
off
Operation with the earlier
Central-Unit (6020):
Functions f1 through f4 cannot be
used. No direction of travel indicator.
Suitable Delta controller:
Delta-Station (6607).
2.5.1.1 Setting Digitial / Delta
Address.
Decoder 1
(locomotive decoder in the tender):
1. Remove the tender insert
(see page 61).
2. Set the coding switches on the
digital decoder for the desired
address according to the table
on this page.
Decoder 1 in this model comes from
the factory set for address 01.
Hence, these switch settings:
Switch
1
2
3
4
5
6
7
8
9
0
off on on off on off on off off off
Important:
Do not confuse the address switches
on the digital decoder with the 8 co-
ding switches on the sound effects
circuit. If these 8 coding switches are
accidentally changed, it may cause
damage in the electronic circuit!
Switches 9 + 10 (designated with 0)
must always be set at “off”.
Suitable Delta addresses:
24, 60, 72, or 78.
Decoder 2
(function decoder in the locomotive):
1. Loosen the pilot truck on the front.
The function decoder for the loco-
motive is located under it in the
locomotive (see page 62).
2. Set the coding switches on the
digital decoder for the desired
address according to the table on
this page.
Important:
The function decoder only
has 8 coding switches. Only these
8 switches from thet table are there-
fore relevant for setting the address.
Tip:
The upper part of the packaging
for the locomotive can serve as a
cradle for it.
Decoder 2 in this model comes from
the factory set for address 02.
Hence, these switch settings:
Switch
1
2
3
4
5
6
7
8
off off on off on off on off
2
25
Operation
Summary of Contents for baureihe 01
Page 1: ...Modell der Baureihe 01...
Page 3: ...4...
