2
1.2 Face Fixture
2 Folding arms
A
= Arm position
HT
=
Fixture
M
= Awning width
MB
= Fitting area of middle fixture (size-dependent, with 3 fixtures)
Sizes in cm
3 Folding arms
A and B
= Arm positions
HT
=
Fixture
M
= Awning width
MB
= Fitting area of 4
th
fixture
Sizes in cm
The distance to a possibly existent ceiling must be at
least 30 mm!
Sizes in mm
1.2.1
Determining the fitting height. Mark out the
position of the fixtures on the fitting surface (wall)
in accordance with the stickers already provided
(red points) on the back of the cassette (A = arm
position).
1.2.2
Considering fastening materials and types of
mounting according to the background (type of
mounting A or B).
The mounting background must
be specified when ordering the awning.
Fastening
materials
are
not
supplied,
since
different
backgrounds (e.g. concrete, chalky sandstone, gas
concrete etc.) require different fastening materials.
Depending on the background, different
fastening systems are offered by the fastenings
manufacturers (e.g. Fischer, Hilti, Upat etc.).
The
corresponding extend forces from our sales
literature are to be taken into consideration.
If the
requirements for fastening are observed, according
to DIN EN 13561, for the user
Wind Resistance
Class 2
can be confirmed for the installation.