Market Forge Industries 4200, Owner'S Manual

Page: 4 / 20

2
INSTALLATION
RECEIVING
Examine shipment for external and inter -
nal damage and completeness. Transport
crated oven through building, to installa -
tion area before unpacking.
2. Report any damage or shortages to car -
rier and Market Forge immediately.
DO NOT AT ANY TIME LAY THE OVEN
DOWN ON ITS TOP, RIGHT SIDE, OR
FRONT. TO DO SO MAY DAMAGE THE
EQUIPMENT AND VOID THE WARRAN-
TY.
ASSEMBLY - VENT BOx ATTACHMENT
Remove steam vent box and packet of
screws from inside oven and attach vent
box to back of oven over vent opening us -
ing five #8 sheet metal screws.
Single Oven on 4” Legs
Fasten legs to the weld nuts located on bot -
tom panel of oven. The hex foot on the leg is
adjustable.
Single Oven on 28” Legs with Shelf
Insert legs ( Fig. 1 No. 3 ) through holes
in shelf ( Fig. 1 No. 1 ) Do not tighten set -
screws in corners of shelf.
Screw leg tops ( Fig. 1 No. 2 ) onto legs.
( Fig. 1 No. 3 )
Insert leg tops ( Fig. 1 No. 2 ) through holes
in angle iron frame ( Fig. 1 No. 4 ) into weld
nuts in bottom of oven.
Screw leg tops ( Fig. 1 No. 2 ) into weld
nuts by turning leg and top assemblies.
Raise shelf ( Fig. 1 No. 1 ) to desired height
and tighten set screws in shelf corners.
1.
2.
3.
1.
1.
2.
3.
4.
5.
Fig. 1
ITEM PART NO. DESCRIPTION QTY.
1 99-6180 SOLID SHELF ST/ST 1
2 A10-0635 LEG TOP 4
3 A10-0634 FLOOR LEG 28” HIGH 4
4 D99-6183 SHELF 1