Market Central, Inc.
R1000 NBS/NAC
Page 8 of 16
GET PORT N
Displays the status of switch N (1-16). The response will be “A” or “B”.
Port 4: B
SET PORT N A[B]
Sets the addressed switch N (1-16) to position A or B.
SET IPADDRESS X.X.X.X
GET IPADDRESS
Set or display the current IP address of the network module. Any change will not become permanent until a SAVE
and RESET operation sequence is performed.
SET SUBNETMASK X.X.X.X
GET SUBNETMASK
Set or display the current subnet mask of the network module. Any change will not become permanent until a
SAVE and RESET operation sequence is performed.
SET GATEWAY X.X.X.X
GET GATEWAY
Set or display the current gateway IP address of the network module Any change will not become permanent until a
SAVE and RESET operation sequence is performed.
SET READCOMMUNITYNAME string
GET READCOMMUNITYNAME
SET READCOMMUNITYNAME string
GET READCOMMUNITYNAME
Set or display the current read or write community name as specified. Note that in general these are case sensitive
fields. Any change will not become permanent until a SAVE and RESET operation sequence is performed.
SET WEBENABLE ON[OFF]
GET WEBENABLE
Set or display the current state of web based access. The network module will not accept any HTTP requests when
web enable is off. Any change will not become permanent until a SAVE and RESET operation sequence is
performed.
SET WEBPASSWORD string
GET WEBPASSWORD
Set or display the current web password. Note that this is a case sensitive field. Any change will not become
permanent until a SAVE and RESET operation sequence is performed.
SET WEBTIMEOUT seconds
GET WEBTIMEOUT
Set or display the current web timeout in seconds. After a period of inactivity of this many seconds, the network
module will request a login. Note that the web timeout cannot be disabled any change will not become permanent
until a SAVE and RESET operation sequence is performed.
