*pre-installed screw
1200 table frame
: Hole (2) must match to the second hole before
tightening the screw.
*1400 table frame
*1200 table frame
1400 table frame
tightening the screw.
B
A
B
C
D
B
The frame (B) is pre-assembled. Do not remove the carton box
until the leg is flip up. This is to prevent any further damages.
Raise the legs, slide the frame outwards to fit desired size and fix
it with the screw that are already pre-mounted in the frame.
Attach D to B and tighten it with screw (C) using Allen key.
Repeat this step on the other side of the leg.
Attach A to B and secure the screw using Allen key.
Repeat this step on the other side of the leg.
Adjust the table length and secure the pre-installed screw using
Allen key.
The installation is completed.
B
carton block
carton block
1
2
3
4
5
6
A