Mark MMC 2000, User Manual

Page: 6 / 48

Overview
Front panel
29.Control booth volume
level control for the output booth.
30.Effect parameter 1 adjustment knob
Adjust the firts parameter(if any)of the
selected effect.
31.Effect parameter 2 adjustment knob
Adjust the second parameter(if any)of
the selected effect.
32.Control sample selector
For selecting and playing samples.
33.Control sampler level
For adjusting sample level.
34.LED level meter L/R
6-digit LED meter of the stereo master
signal within the range of -13 dB to +3 dB.
35.Search button
Press to turn on/off the searching funct-
ion of the touch jog wheel.With the se-
arch function,you can go to a specific
point in the music on the deck easily by
turning the touch jog wheel.
36.Scratch button
Press to turn on/off the scratch function
of the touch jog wheel.Noted that the
touch jog wheel cannot be used for scrat-
ching and searching at the same time.
37.Touch jog wheel sensor LED
Lights when the touch jog wheel is
touched.
38.BPM Button
Sets the number of beats per minute
(BPM) of a title manually.For this press
the button several times to the beat of the
music.
39.Headphones inputs
6.3 mm and 3.5 mm jacks headphone 1
and 2 for connecting stereo headphones
(impedance
≥ 8
Ω).
40.Control cue level
Level control for headphones connected
to the jacks headphone 1 and 2.
41.Control CUE
For selecting and crossfading the monit-
oring signal for the headphones depend-
ing on the cue mode selector switch:
mode cue: The prefader level of Deck A
and Deck B is monitored.
mode split: The prefader level and the
master signal is monitored.
- 5 - User Manual/Manual de Instrucciones MMC 2000
EN