Mark MAX 3 BT, User Manual

Page: 6 / 24

EN
MAX 3 BT - 5 -
User Manual / Manual de uso
1- USB PORT
This Type B USB port can be used to connect the computer via Type
B to A connector.
2- POWER SWITCH
To turn on/off the unit.
3- POWER LED
This LED will light up when the unit is powered on.
4- MIC/LINE IN JACK
This combined jack can be used to connect mono signal, such as XLR
microphone or 1/4" line level.
*Note: Please choose balanced cable and MIC to connect. Do not
use the unbalanced ones. When the unit is powered on, remember
not to connect the high level signal to XLR MIC IN, which may damage
the unit.
5- LINE IN JACK
This RCA jack is used for connecting stereo line in signal source.
6- 2TK IN JACK
This RCA jack is used for connecting stereo line in signal source.
7- 2TK OUT JACK
This RCA jack is used for connecting stereo tape recorder.
8- MAIN OUT JACK
This 3.5mm stereo jack is used to connect the active stereo speaker.
9- MONITOR OUT JACK
This 3.5mm stereo jack is used to connect the stereo headphone.
10- GAIN CONTROL
It is used for adjust the level of mono input.
11- HIGH
This treble control can be used to reduce the HF noise or boost the
sound of percussion.
12- LOW
This bass control can be used to boost male or effect of drum & bass.