NOTE
DANGER
17
4.1.4 Steel
5 TRANSPORT AND STORAGE
Always observe the information below to ensure safe transport and storage.
• Make sure that the packaging is dry and undamaged.
• Store this product in a clean and dry place, where it is protected from mechanical
hazards (e.g. sharp-edged objects) and the influence of chemicals
(e.g. acids, alkalis).
• Transport this product in the packaging supplied or equivalent packaging.
6 MAINTENANCE
6.1 Repairs
Modifications to this product
Unauthorised repairs or extensions to the product, or tampering with it, can lead to
falls from a height and very serious accidents.
• Repairs (e.g. if screws are not seated securely in the installation base) may only be
performed by specialist companies.
• Only MARK Save A Life may modify this product or add to it.
If it seems unsafe to continue using this product, do not use it again under any circum-
stances; instead, have it inspected by MARK Save A Life or an authorised partner.
6.2 Cleaning
• Clean metal parts with a damp cloth.
• Never use chemical detergents.
Steel
Certification
EN 795 : 2012 class A1, TS 16415 : 2013
Screws
NIRO M10 A2-80
Length min. 35mm
Drill
Metal drill bit
ø 11mm
Setting depth in the load-bearing
subsurface
min. sheet thickness >3mm
Quality and installation base
S 235 JR
Remarks
Tightening torque
65 Nm
Distance from edge
≥
25mm
Deformation
Maximum expected deformation due to
a fall from a heigh
≤
50mm
Permissible installation positions
Number of users: 1 person
Number of users: 2 persons
16