Important!
Do not switch any wires; this
will damage the device!
• Slide the upper protective cap over the
connection point and hanging point to the
ceiling and screw it into place onto the
piping.
6.2 Operating unit
The operating unit (220-240V / 50Hz) must be
installed by an electrician.
Wiring diagram:
Once installation is completed, you can switch the power back on with the main switch. Your ceiling fan is
now ready for use.
7.0 Operation
Check that you have complied with all safety regulations; you can then switch on the device by turning the
operating button clockwise from OFF to HI. The fan will start to rotate at the highest setting. By turning
further, to MED or LOW, you will slow the fan down. In order to switch the fan off, turn the button
clockwise to OFF.
8.0 Cleaning and maintenance
Switch the fan off in order to clean it. The fan only needs general, exterior maintenance. Dust it regularly
with a soft cloth or duster or use a vacuum cleaner with a soft brush to clean. If it becomes very dirty,
clean with a slightly damp cloth and a mild household cleaning product. Dry everything thoroughly and
allow the fan to dry properly before using again. Ensure that water does not come into contact with
anything other than the casing and the turbines! Never rinse or spray the fan!
In order to prevent material discolouration or deformities, never use aggressive or corrosive (cleaning)
products.
Repairs must be carried out by qualified engineers. This also applies to repairs to the electrical elements.
Make sure that the power is always switched off via the main switch. Please request original parts if the
device needs to be repaired. Never open up the device yourself!
If the device is subjected to modifications or repairs are carried out by unqualified persons, the guarantees
from the supplier, importer and manufacturer will become null and void.
6
