6
Assembly
NOTE: Hand tighten bolts and lock nuts until machine is fully assembled.
Push two Spacers (24) into Leg Lift Bar (12).
Attach the Leg Lift Bar (12) onto the Main Frame (5)
wit h one Bolt M10X75 (A4) and one Lock Nut M10 (C1).
Slide Foam Rollers(25)
Foam Roller Tubes (10) and secure in place using
Foam Roller Caps (20).
STEP 3
Insert the Foam Roller Tubes(10) into the Leg Lift
Bar (12).
onto each end of
12
24
24
C1
A4
5
20
20
20
20
25
25
25
25
10
10
12
5
Attach Arm Curl Handle (30) to Leg Lift Bar (12)
with a Ring Head Lock Pin (28).
Make sure the set screw is on the bottom of the sleeve.
Secure the weight plates (not included) with the 2" Spring
Clip (14).
30
12
14
13
28
To use olympic weights, secure the Olympic Sleeve
(13) to the weight tube on the Leg Lift Bar (12) using
the set screw (pre-assembled).
STEP 4
STEP 5
