Series 3 Digital Force Gauges
User’s Guide
16
Press
ENTER
to modify the contrast. Select a value from 0 to 25, 25 producing the most contrast.
11.4 Tones
Audible tones can be enabled for all key presses and alerts, such as overload, set point value reached,
etc. The Set Point alert can be configured to be either a momentary tone or a continuous tone (until the
load is restored to a value between the set points). To configure the functions for which audible tones will
apply, select
Tones
from the menu. The screen appears as follows:
11.5 Initial Mode
This section is used to configure the initial mode upon powering on the gauge. To access this parameter,
select
Initial Mode
from the menu. The screen appears as follows:
The default value is Real Time.
11.6 Restore Default Settings
Default factory settings can be restored by selecting
Restore Defaults
from the menu. The settings may
be found in the
Specifications
section. The screen appears as follows:
RESTORE DEFAULT
SETTINGS?
No
Yes
INITIAL MODE
*
Real Time
Peak Compression
Peak Tension
TONES
Keys
* Alerts
Set Points
* Momentary
Continuous
LCD CONTRAST
Set Contrast
10
www.
GlobalTestSupply
.com
Find Quality Products Online at:
