7
Getting Prepared
Loading Film
To take out the holders, first remove the film holder bar and then unscrew the conical holders.
After one of the sides is fixed, insert the film roll on the bar and screw back the conical head to fix
on the roll, as shown in figure 5.
Films are centre-folded and maybe produced either rolled in clockwise or counter clockwise as
shown in figure 5. Your machine is capable for either application.
After loading the film, (when mounting the loaded bar) make sure that the opening side of the
film faces the front side of the machine (device).
Pull the working plate, the plate which slides back and forth, towards the operator. The film must
pass over and under the product plate. (The product plate must remain in between the upper
and lower leaves of the film.) As the opening side of the film faces the operator, the product can
easily be inserted.
You need to cut and seal the film at least once to start the first packaging. Place your product on
the plate together with the film and slide together into the chamber of the machine.
Figure 5
Summary of Contents for COMPACK 4500-i
Page 2: ......
