Marine Revolution
Smartwave SW 4200 Owner’s Manual
Page
5
Environmental considerations
Polyethylene thermoplastic is fully recyclable, an important feature in a world where we are conscious
of our impact on the environment
Safe handling practices should be observed when handling fuel, oil and cleaning agents to avoid
contaminating the environment.
Remember, that wake and wash produced by your craft can cause erosion to shore lines. Always
observe the speed limits in restricted areas.
During refueling or re oiling operations on or off the water, please avoid any spillage, and ensure that
nothing is discharged into the water or drains
Boat Design
The rotationally moulded virgin grade polyethylene construction of this craft is extremely strong, it will
not rot, rust, corrode or split. It is temperature stable and UV stabilized.
The Hull is manufactured as one piece and twin skinned. Polyurethane buoyancy foam is injected
between the hull skins to provide buoyancy in the swamped condition.
Design Category
Category C
INSHORE:
Designed for voyages in coastal waters, large bays, estuaries, lakes and rivers where
conditions up to, and including, wind force 6 and significant wave heights up to, and including, 2 m
may be experienced.
Or
Catergory D
SHELTERED WATERS:
Designed for voyages on sheltered coastal waters, small bays, small lakes,
rivers and canals when conditions up to, and including, wind force 4 and significant wave heights up
to, and including, 0,3 m may be experienced, with occasional waves of 0,5 m maximum height, for
example from passing vessels.
Marine Revolution Smartwave SW4200 Series
Type of craft ;
Motor boat
Type of hull;
Monohull
Deck;
Open Boat
Construction Material;ISO12215
Alkatuff LL711UV is a linear low density polyethylene.
Propulsion;
Petrol engine
Type of engine;
Outboard
Max. recommended engine power;
30 kW (40hp) Tiller / 37KW (50Hp) Remote
Length and beam of hull (m);
4.3 x 1.93 m (ISO 8666)
Draught (m);
0.45 m
Fuel Capacity;
5.5 imp gal = 25 ltr (in manufacturers supplied tote tank)
Battery Capacity;
75-85Ahr leisure marine lead acid battery
Stability/buoyancy
Foam filled using a
B.I.F.F
“Buoyancy In Fill Foam” system.
This craft has been assessed as being capable supporting
the crew even when swamped
