Marine Revolution
Smartwave 2400 Owners Manual
Page
8
•
Do not fill the fuel container to maximum capacity. Gasoline will expand considerably as it
warms up and can build up pressure in the container. This pressure can cause leakage and a
potential fire hazard.
Please refer to the engine owner’s manual for specific fuel system information.
Location of through-hull fittings
1 x drainage bung is located at the stern, on the back edge of the keel. This is only removed if it is
necessary to drain water from between the hull skins.
1 x internal bung is located on the inside of the transom at floor level as seen above. This is used to
drain the deck of the boat whilst out of the water and during storage.
Ensure all drain bungs have been secured before launching the boat
Steering System
For Tiller steering details refer to the engine manufacturer’s manual.
Crew Safety
This boat does not require any specific devise to re-board due to its characteristics.
Re entry at the stern of the boat is recommended and demonstrated in pictures on page 4.
