Marine Revolution
Smartwave 2400 Owners Manual
Page
5
Safe handling practices should be observed when handling fuel, oil and cleaning agents to avoid
contaminating the environment.
Remember, that wake and wash produced by your craft can cause erosion to shore lines. Always
observe the speed limits in restricted areas.
During refueling or re oiling operations on or off the water, please avoid any spillage, and ensure that
nothing is discharged into the water or drains
Boat Design
The rotationally moulded virgin grade polyethylene construction of this craft is extremely strong, It will
not rot, rust, corrode or split. It is temperature stable and UV stabilized. The Hull is manufactured as
one piece and twin skinned. An air space between the hull provides buoyancy in the swamped
condition.
Design Category
This craft was designed for voyages on small lakes, rivers, canals and sheltered waters.
Marine Revolution SW2400
Type of craft;
Motor boat with oars
Type of hull;
V Hull
Deck;
Open Boat
Construction Material; ISO12215
Linear low density polyethylene.
Propulsion;
Petrol/Electric engine and oars
Type of engine;
Outboard
Max. recommended engine power;
3.75 kW = 5h p
Length and beam of hull (m);
2.40 x 1.30 m (ISO 8666)
Draught (m);
0.15 m
Fuel Capacity;
5ltr (Manufacturer’s internal tank)
Battery Capacity;
none
Maximum Total Load;
270kg =
number of persons 3
Essential equipment
Engine
•
Please refer to engine manufacturer’s handbook as supplied with your craft.
•
Start in gear protection (ISO 11547) is provided with your engine control system
•
Please read the engine manual and familiarize yourself with its safe operation
before using your craft.
•
Carry an alternative means of propulsion like oars
•
A spare can of fuel is essential and should be clearly marked if different types are carried, eg
petrol or diesel
