manualshive.com logo in svg

Marine Rescue Technologies sMRT V100, User Manual, Page: 3 / 40

Share
Download
Marine Rescue Technologies sMRT V100 User Manual Download Page 3

sMRT V100/V100X User Manual v1.0

MRT Ltd. © 2014

3

1 

•

 Introduction

This user manual provides all the information required to operate and test 

the sMRT V100/V100X. The following symbols and conventions are used 

to indicate important information. Always observe these instructions. 

Ensure you read the ‘Warnings & safety information’ section of this 

manual before first use of the device.

 

WARNINGS:

 Instructions that, if ignored, could result in serious

 

personal injury or death. These must be observed for safe  

 

 operation.

 

CAUTIONS:

 Instructions that, if ignored, could result in personal

 

injury or material damage caused by incorrect operation of the

 

equipment. These must be observed for safe operation.

 

IMPORTANT NOTE:

 Important instructions that should be  

 

 

adhered to during system operation.

Typographic conventions

 

1. sMRT V100/V100X hardware features are displayed in bold    

 

upper case letters, e.g. 

SWITCH LOCK

.

 

2. sMRT V100/V100X operation states are displayed in bold  

 

 

uppercase letters surrounded by square brackets, e.g. 

[READY]

.

Summary of Contents for sMRT V100









































Reviews:

No comments