background image

2

www.MarinePowerUSA.com

1. 

Warranty

1.  MARINE POWER (“the Company”) warranties each 

new MARINE POWER BASE or PARPAC engine 
properly registered with MARINE POWER to be free 
from defects in material and workmanship.

2.  The warranty period for a MARINE BASE OR 

PARPAC engine is one (1) year parts AND BENCH 
LABOR (MAXIMUM LABOR $500.00) only from 
the date of sale. Receipt of a properly completed 
Warranty Registration / Sea Trial form must be re-
ceived by Marine Power for any warranty claim to 
be honored. All subsequent purchasers must inform 
MARINE POWER in writing and with a payment of 
a $300.00 transfer fee, of the sale of the engine to 
continue the warranty. If notification is not received 
by MARINE POWER within fifteen (15) days of the 
resale; the warranty will be null and void.

3.  In the case of commercial use, this Warranty shall 

be in effect for ninety (90) days from the date of 
startup, but no longer than six (6) months from 
the first date of retail purchase. MARINE BASE 
and PARPAC warranty claims will be for parts 
and BENCH labor only. Total labor charges cannot 
exceed $500.00.

4.  The Company’s obligation is limited to repairing 

or replacing those parts defective in material and 
workmanship only. At Marine Power’s option, it 
may replace such part with a part of equal quality 
as shall be necessary to remedy any malfunction 

resulting from a defect in material or workmanship 
as covered in this Warranty. MARINE POWER will 
make all necessary repairs under this Warran-
ty free of charge at the MARINE POWER factory. 
Optionally, MARINE POWER may provide for the 
repair or replacement of any defective part at the 
selling dealership or a service center of MARINE 
POWER’s choice. MARINE POWER will make 
payment reimbursements for labor to replace such 
part as previously provided in the then current flat 
rate manual.

5.  MARINE POWER, distributor, or dealer must be 

advised in writing of any warranty related problem 
prior to the expiration of the Warranty.

6.  This Warranty will not apply to:

A) Use of an accessories or parts not manufactured 

or sold by MARINE POWER.

B) Neglect, failure to follow maintenance sched-

ules, accident, abnormal operations, misuse, 
negligence, improperly maintained, improperly 
operated or installed, racing, or engine mod-
ification. Problems arising from installation, 
application, exhaust to engine, fuel lines to the 
engine, propping, cooling to the engine or engine 
damage due to defective electrical hookups.

C) Rust, corrosion or effects of weather.
D) Damage caused by water entering engine via the 

intake, exhaust or submersion.

E) Detonation or operation with fuels, oils or 

lubricants which are not suitable for use with 
this product. Detonation causes: Poor fuel 
quality, overloading of engine, improper gear 
or propeller selection, engine overheating, 
excessive back pressure, incorrect ignition 
timing, excessive total timing.

F) Reimbursement for: haul-out, launch, towing, 

storage charges, rental charges of any type, 
inconvenience of any type, loss of time or 
income, expense of returning a MARINE POWER 
product to a service facility, towing, lodging, loss 
or damage to personal property.

G) Carburetor after the first five (5) hours of opera-

tion. Fuel, air and float adjustments are part of 
the installation.

7.  Reasonable access must be provided to the 

product for warranty service. Removal and/or 
replacement of boat partitions or material because 
of boat design for necessary access to the product 
is not covered.

8.  Warranty service must be requested by delivering 

the product for inspection to the retailer from whom 
the product was purchased or any convenient 
marine service center.

9.  Proof of Warranty must be provided at time of 

Summary of Contents for BASE Series













Reviews: