16
EN
Installation manual:
1. Mount two metal round clamps (J) on the two opposite legs of the pool so that
the threads of the screws point outwards from the pool. Do not tighten bolt
nuts.
2. Screw the suspension arms (F) and (G) to the joints (D) and (E) from which we
remove the longer screws. The parts assembled are hung on the pool frame from
both sides where the ring clamps (J) are mounted on the legs of the pool.
3. Attach the joint (D) and (E), which is mounted to the suspension arms (F) and (G),
to the ring clamps (J) and insert the longer screws that we removed from the
arms (F) and (G). Then tighten all the screws simultaneously with enough force,
so that there is no damage to either the screws or part of the structure.
4. Join the GFR rods (A) and put extension pieces (I) on their ends. We will obtain 5
long rods.
5. Slide carefully the joined GFR rods into the tunnels of the roof cover (C).
6. Insert the entire cover (C) assembled and anchor it to both joints (D) and (E) on
both sides of the pool. Check if all locking pins on the attachments are properly
engaged.
7. Place the shoes (K) under 4 legs of the pool, which are close to the roof attaching
clips. Slide the shoe (K) under the pool leg and turn it so that the strap cannot be
pulled out.
8. Install the straps (H). Thread the free end of the strap (H) through the clip loca-
ted on the roof cover (C) and tie the strap firmly so that it does not stay untied.
The roof contains 4 clips and one strap (H) must be attached to each clip.
9. Thread the other untied end of the strap (H) through the shoe at the foot (K) and
connect the clasp, part of which is at one end of the strap (H) and the other in the
middle. Adjust the length of the strap (H) so that the roof cover is taut.
10. Finally, put the MARIMEX joint covers (B) on the joints (D) and (E) using Velcro.
Safety instructions - extremely important!
• Read and follow these instructions. Keep this manual for future reference.
• Installation is only permitted on a sufficiently stable subsoil to prevent the shoes
from being pulled out from under the pool leg and possibly crossing the roof
structure.
• Never leave the installed roof structure on a pool without being filled with water
to the prescribed limit.
• Two adults are required to install the roof.
• Packaging materials are not intended for games. Keep them out of the reach of
children.
• The opening and closing of the pool roof must always be performed by two
adults. Each person stands on the other side of the pool at the joints of the roof
and manipulate the roof simultaneously in the same direction.
• Using the frame pool roofing according to the instructions in this manual
eliminates virtually all hazards. Remember, however, that children have a natural
tendency to play, and this can lead to unpredictable dangerous situations for
which the manufacturer and dealer cannot be held accountable.
