-9-
4.
Press the two Ice Hopper release catches and lift
the Ice Hopper to remove (Figure 5).
PLEASE FOLLOW THE INSTRUCTIONS BELOW TO
SAFELY REMOVE THE SHAVING BLADE ASSEMBLY
FROM THE ICE HOPPER.
5.
Turn the Shaving Blade Assembly Nut counter
clockwise (to the left) and remove, then remove the
Shaving Blade and store in a safe place. (Figure 6).
BE SURE TO RINSE THE SHAVING BLADE AND DRY
THOROUGHLY BEFORE STORING.
6.
Carefully lift the Blending Jar straight up to
remove. The Ice Chute is spring-loaded and can be
pushed up. If the Bending Jar is not easily removed,
rock gently and lift. Do not twist.
7.
Turn the Blending Jar upside down and unscrew the
Jar Base. Carefully remove the Blending Blade, and
Blending Blade Sealing Ring.
WARNING: THE BLENDING BLADE IS SHARP.
HANDLE WITH CARE.
8.
To remove the Ice Melt Reservoir hold the unit still
and pull straight out on the handle.
9.
Blending Jar Lid, Blending Jar, Blending Blade,
Blending Blade Sealing Ring, Jar Base and Ice Melt
Reservoir can be safely washed in the top rack of
your dishwasher. Use only top rack. Failure to do
so will result in damage. The Ice Reservoir Lid,
Ice Reservoir, Shaving Paddle, Ice Hopper, Ice
Defl ector Blade Assembly, Shaving Blade and Ice
Melt Reservoir are only exposed to ice and water
and they should be rinsed with soap and warm
water and allowed to air dry.
10.
Use a damp cloth to clean the outside of the unit.
WARNING: UNPLUG UNIT BEFORE CLEANING. DO NOT
USE SOLVENTS. NEVER IMMERSE THE UNIT IN WATER.
ICE
DEFLECTOR
Figure 5
Figure 6
