MAREX MX755, Instruction Manual

Page: 8 / 72

- 8
WIRELESS CAMERA
1. Camera Antenna: sends and receives signals to/from the monitor.
2. iR leDs. infrared leDs provide viewing in low/ no light conditions.
3. Camera lens: Catches the video in front of the lens and transmits video from camera to monitor.
4. light sensor: sense brightness for changing between daytime and nighttime vision.
5. Microphone: Transmit audio to receiver.
6. Pair Button: The pair button is located on the front of the camera. it is used to pair the camera with
receiver.
7. PiR sensor: Detects motion in front of the lens and emits detection signal to transmitter.
8. speaker: Produces the sound transmitted from the receiver.
9. Adjustment screws: Adjusts the camera up/down and clockwise/counterclockwise.
SET UP THE HARDWARE
MONITOR
1. Flip out the stand on the back of the monitor; and position the antenna.
2. Connect an AC adaptor to the power input on the side of the monitor. Connect the other end of the
adapter to a 120 volt AC (standard indoor) power outlet.
3. Press and hold the POWeR button on the top of the monitor for 3 – 4 seconds to power it up.
4. The monitor displays the start up Ui for a few seconds and then transitions to the liVe view.
The screen remains dark until the cameras are powered up.
CAMERA
General
The camera included with your monitor is weatherproof and have an iP65 rating. Water can be sprayed on
them and they will still work; however, the cameras cannot be submerged.
en