Maretron DSM410, User Manual

Page: 245 / 289

Revision 1.7.2 Page 229
Figure 270
– Watermaker Status Display
7.26 Switch/Breaker Display
The DSM410 is capable of controlling loads controlled by a Maretron DCR100 DC Relay, a Carling
OctoPlex AC Box or DC Box, or other NMEA 2000
®
load controller which uses NMEA Command of
the 127501 Binary Switch Bank Status PGN for control.
The display may be set up in several different configurations:

Single-Indicator Light
– this creates a single switch/breaker

2 rows
– this creates four rows of single switches/breakers

3 rows
– this creates three rows of single switches/breakers

4 rows
– this creates four rows of single switches/breakers

2 rows, 2 columns
– this creates two rows by two columns of a single switch/breaker
Figure 271 b
elow shows a Favorite Screens Setup screen with a single window configured with the “4
rows” configuration.
Figure 271
– Configuration of Switch/Breaker Display