27
Maintenance And Storage
1. After diving, make sure housing is locked and sealed, wash the housing body with fresh
water.
2.
When immersed with fresh water, push each button few times, thus can help to let salt
and sand go out.
3. Use a soft cloth to wipe and clean the glass on the dome or macro port.
4. After each dive, clean the O-rings and check if there are damages on the O-rings.
5. Use sturdy and shock-proof case to carry the housing and its accessories, don’t put camera
or lens inside the housing during travel and transportation
6. Don’t leave the housing for too long inside vehicle under exposure to sunlight or heat.
7. If don’t use the housing for long period, remove the batteries from flash trigger and leaking
alarm.
