Mareli Systems RubynoR AMG 1090, Manual

Page: 13 / 32

13
Connect the condensate pipe to the nozzle pos.8.
Pos.8
Hydraulic connections
The selection and sizing of hydraulic ducts must be made by a specialist who must work in accord-
ance with the required good technical skills and applicable laws, taking into account the fact that
smaller pipes cause malfunctions.
To make the connections:
- lay the hydraulic pipes
- Tighten the connections with a wrench and another holding counter
- check for liquid leaks
- cover the connections with insulating material.
Hydraulic pipes and fittings must have thermal insulation. Avoid partial insulation of pipes.
Do not tighten too much to avoid damaging the insulation.
Use tow and green paste to seal the threaded joints; the use of Teflon tape is recommended when
there is antifreeze in the hydraulic circuit.
8 7