background image

14

Mareli Systems

5 Safety and unexpected risks

Terms of danger may arise in the following cases:

• 

Automated pellet stove is used incorrectly;

• 

The unit is installed by unqualified personnel;

• 

The safety instructions described in this management are not met;

Unforeseen risks:

Pellet fireplace “Mareli” has been designed and manufactured in accordance with the safety re-

quirements on the national, regional and European levels. Although considered possible risks 

arising from improper use, you may experience the following risks:
• 

Risks of spreading combustion outside fireplace - opening the door of the chamber of the 

fireplace may fall hot / burning particles (as hot ash and small particles burning coal), which 

could lead to a fire in the heated room. It is therefore necessary that the product always works 

with a tightly closed door. It can only be opened when the product has completely cooled 

down;

• 

Risks of burns caused by high temperatures as a result of the combustion process in the 

combustion chamber and / or access to the door of this burn chamber when the product is 

not completely cool;

In case of fire hazard the product should be stopped by the controller and power supply until the 

cause of the problem is determined.

Maintenance program

At each 

ignition

Twice

per season

Weekly

Annual

Combustion chamber
Clean the ashtray

Glass
The Door
Clean the flue gas outlet
Door seals

Chimney

V

V

V

V

V

V

V

V
V

Summary of Contents for PB 13

























Reviews: