2.2.4 For iPhone users: The request to "pair new device" will appear on your phone
after scanning.
2.2.5 If the QR code scan fails, select the manual connection function to complete
the pairing via Bluetooth.
2.3 APP settings (functions are available only if watch and phone have been paired
succesfully)
•
Call notification
: Tap to turn on/off this function. If turned on, you can hang up
the incoming call on your watch.
•
Social media notifications
: Tap to turn on/off and choose which apps’
notifications you want to receive on your watch.
•
Alarm clock
(up to 5 alarms)
•
Sedentary reminder
: Tap to turn on/off. Set starting time, end time, interval and
threshold.
•
Drink water reminder
: Tap to turn on/off. Set starting time, end time, interval
and threshold.
•
DND mode (Do not disturb mode)
: Tap to turn on/off. Set starting time and end
time. Note: when turned on, the watch will not receive notifications.
•
Turn on screen when turning wrist
: Tap to turn on/off.
•
Heart rate monitoring
: Tap to turn on/off. Set starting time, end time, and
interval. If turned on, the watch will automatically monitor heart rate, and sync
data to APP.
•
Remote camera control
(on some phones it may be necessary to turn on the
camera manually on the phone)
•
Find device
: Upon tap, watch will pop up a watch icon and vibrate.
•
Firmware update
(make sure there is at least 50% battery before updating, keep
your watch near your phone during the update)
•
Device version
: To check firmware version of the watch.
•
Unbound
(iPhone users must enter phone settings, enter Bluetooth settings and
ignore the device to make sure the device is completely disconnected)
3. Main functions
3.1 Basic Operation
3.1.1
Power on:
Long press the button for 3 seconds to turn on the watch, short press
the button to light up the watch if it is in standby mode.
3.1.2
Power off:
if the screen is on, long press the button for 3 seconds to turn the watch
off.
