background image

 

LIMITED WARRANTY 

 

Escalade warrants this product to be free from defects in workmanship and material, under 
normal use and service conditions, for a period of two years on the frame and one year on all 
other parts and components from the date of purchase. This warranty extends only to the 
original purchaser. Escalade’s obligation under this Warranty is limited to replacing damaged 
or faulty parts at Escalade’s option. 

 

All returns must be pre-authorized by Escalade. This warranty does not extend to any product 
or damage to a product caused by or attributable to freight damage, abuse, misuse, improper 
or abnormal usage, purchasers own repairs or for products used for commercial or rental 
purposes.  No other warranty beyond that specifically set forth above is authorized by 
Escalade. 
 
Escalade is not responsible or liable for indirect, special or consequential damages arising out 
of or in connection with the use or performance of the product or other damages with respect 
to any economic loss, loss of property, loss of revenues or profits, loss of enjoyments or use, 
costs of removal, installation or other consequential damages or whatsoever natures.

    

 

The warranty extended hereunder is in lieu of any and all other warranties and any implied 
warranties of merchantability or fitness for a particular purpose is limited in its scope and 
duration to the terms set forth herein.   

 

Your statutory rights are not affected.

 

 

 

ORDERING REPLACEMENT PARTS 
 
Replacement parts can be ordered by calling our Customer Service Department 
Monday to Friday 9am to 5pm

.  

Tel:  00 44 1792 222 562 

E mail:  [email protected] 

 

When ordering replacement parts, please give the following information, 
 
1. Model 
2. 

Description of Parts 

3. Part 

Number 

4. 

Date of Purchase 

 

 
 
 
 
 
 
 
 
 

28 

Summary of Contents for MP-2106






























Reviews: