COMPUTER INSTRUCTIONS
FUNCTION
1. Scan:
Automatically scans through each function in sequence so that you can see your
progress without pressing the “mode” button each time.
2. Time:
Automatically accumulate workout time when starting exercise. 0:00 – 99:99
Minutes
3. Speed:
Display current speed during workout time. km/h
4. Distance:
Automatically accumulate workout distance when starting exercise. 0.00 –
99.99 km
5. Calories:
Automatically accumulate calories amount consumed when starting exercise.
0.00 – 9999 cal
6. Pulse:
Automatically detects and displays your current heart rate when exercising.
7. Auto On/Off:
When you start to exercise or press the button on the computer, the
computer will turn on. If the computer does not receive a signal for more than 4 minutes
the power will turn off automatically.
Reset:
Press and hold the button for 2 seconds will reset all function values to zero.
8.
Hand Pulse Sensors
This cycle comes with hand pulse sensors which can be found on the handlebars. To operate, place
your palms on the sensors. It will take a few seconds for your heart rate to be displayed.
The pulse reading is not an accurate reading and is intended only as a guide and should not be
used for medical purposes
12