OPTIONAL ACCEssORIEs
SPARE TIPS
Code
Model
Note
33400206
TIP N9-1
High quality
33400207
TIP N9-2
33400208
TIP N9-3
33400209
TIP N9-4
GHOsT30 -
User’s manual
User’s manual
- GHOsT30
TIP REPLACEMENT
Note: Tip replacement or cleaning should be done only when the iron is at room tempe-
rature or below. The tip can be changed or replaced simply by unscrewing the knurled nut
barrel assembly. The station must be switched off and allowed to cool before and during
this operation, as damage may occur if the system is left on without the tip inserted, after
removing tip, remove any oxide dust that may have formed in the tip retaining area of the
barrel. Be careful to avoid getting dust in your eyes. Replace the tip and screw the retaining
knurled nut barrel assembly using only hand pressure to tighten. Pliers should only be used
to tighten the nut if loosening occur when the iron is hot to avoid burning your fingers. Do
not over tighten as this would damage the element.
GENERAL CLEANING
The outer case of the iron or station may be cleaned with a damp cloth using small amounts
of liquid detergent Never submerse the unit in liquid or allow any liquid to enter the case of
the station. Never use solvent to clean the case.
ATTENTION
1– The appliance is not a toy, and must be kept out of children’s hands.
2– Before cleaning the appliance or changing the filter, always remove the power lead
plug from the socket. Unscrewing the housing is not permitted
3– This appliance is not intended for use by persons(including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge, unless
they have been given supervision or instruction concerning use of the appliance by a
person responsible for their safety.
4– Return to professional for cord replacement or service.
Spare sponge
