2.0 Configuration and Modbus map
User’s Manual GW-DLMS-485-ELSA15
Page 7
From this page, through the links at the top of the page, you can browse web pages that contain the
data for the single Meter or go on the configuration pages of the Gateway (Home PLC).
It’s possible to change baudrate of the port connected to meter from Serial port baudrate selection
in case meter works with speed different from 9600 that usually is standard.
Time between readouts can be set from 10 to 3600 seconds.
String debug is useful to understand the communication with meters. With GATEWAY REBOOT
button you can force the gateway to reboot. The confirmation of the changes is recorded using the
Submit button.
You can also change the energy meter’s serial number connected to the Gateway. This step is
required to enable communication between Gateway and the meter.
2.2 Gateway Settings
To change the gateway settings, such as IP address, you need access to the configuration pages
through the appropriate link (System) in the header of web pages that contain the data read from the
counters.
This brings us to the home screen of the device configuration and clicking on Network Setup, you can
change the network settings of the device.
Credentials to login and modify parameters are: Username = Admin, Password = Admin.
Changes in Hardware Setup and in Network Setup are applied to the gateway after a power reboot.