Marco JET6, Instruction Booklet

Page: 3 / 18

3
INTRODUCTION
The information provided in this manual is intended to assist in
the installation and maintenance of the JET 6 Coffee Brewer &
FCG 6 grinder. Please read the instructions carefully to prevent
accidents and ensure an efficient installation.
This manual is not a substitute for any safety instructions or
technical data affixed to the machine or its packaging. All
information in this manual is current at the time of
publication and is subject to change without notice.
The company accepts no responsibility for any damage or
injury caused by incorrect or unreasonable installation and
operation.
RATING PLATE
A. Model Number and name.
B. Product serial code (xxxxmmyy)
C. Rated Voltage.
D. Rated Power.
E. Contact details.
F. WEEE Logo
This logo indicates that the product must not be disposed
of as household waste. To help prevent possible harm
to human health and/or the environment, the product
must be disposed of in an approved and environmentally
safe recycling process. For further information on how
to dispose of this product correctly, contact product sup-
plier, or the local authority responsible for waste disposal
in your area.
G. Regulatory standard logo
This equipment has been designed and tested to comply
with all applicable regulatory standards set by
international, independent and government authorities.
SAFETY INSTRUCTIONS
• Installation, maintenance and use should only be carried
out by authorised personnel.
• Installation should be in accordance with applicable
regulations of the country of installation.
• This appliance is not intended for use by persons
(including children) with reduced physical, sensory or
mental capabilities, or lack of experience and knowledge,
unless they have been given supervision or instruction
concerning use of the appliance by a person responsible
for their safety.
• Children should be supervised to ensure that they do not
play with the appliance.
• Position on a flat, stable surface.
• DO NOT
◦ Touch hot surfaces.
◦ Immerse the appliance in water.
◦ Leave appliance unattended during operation.
◦ Remove filter basket during use.
◦ Use outdoors.
• Disconnect from power supply when appliance is not
in use
• Repairs and service should only be carried out by a
service technician.
◦ Appliance must be fully disconnected from
mains power before removing any panels.
◦ If the power cord is damaged, it must be
replaced by the manufacture, its service
technicians or similarity qualified persons to
avoid hazard.
• Before any attempt is made to move or service the
brewer ensure it is unplugged, and drained and allowed
to fully cool.
• The ambient temperatures this unit should operate within
are 5ºC - 35ºC.
• This appliance should not be installed in a tightly
enclosed area (such as a cupboard). Air should be able
to freely circulate around it.
The appliance is designed for use as described in the
instructions. Failure to install, maintain and/or operate this
brewer according to the manufacturer’s instructions may result
in conditions that can cause injury or damage to property. If in
any doubt about the serviceability of the brewer always contact
the manufacturer or your own supplier for advice.
It is recomended to de-scale the machine every 3 months
in hard water areas and every 6 months in soft water areas.
De-scaling should be carried out by a service agent. It is also
recomended to clean the urn after each days brewing using a
proprietary urn-cleansing compound.
B
A
C
D
E
G
F