Marco JET 6, Service Manual

Page: 4 / 34

JET6 ServiceManual.docx 29/09/2015 Revision 2 Page 4 of 34
• Children should be supervised to ensure that they do not play with the machine.
• In the event any wires are damaged, such wires can only be replaced by experts or professional
service staff from the manufacturer service department or similar functional departments.
•
Installation, maintenance and use should only be carried out by authorised personnel.
•
Installation should be in accordance with applicable regulations of the country of installation.
•
Position on a flat, stable surface.
DO NOT:

Touch hot surfaces.

Immerse the appliance in water.

Leave appliance unattended during operation.

Remove filter basket during use.

Use outdoors.
•
Disconnect from power supply when appliance is not in use
•
Repairs and service should only be carried out by a service technician.
•
Appliance must be fully disconnected from mains power before removing any panels.
•
Before any attempt is made to move or service the brewer, ensure it is unplugged, drained and
allowed to fully cool.
•
The ambient temperatures this unit should operate within are 5ºC - 35ºC.
•
This appliance should not be installed in a tightly enclosed area (such as a cupboard). Air should
be able to freely circulate around it.
•
The appliance is designed for use as described in the instructions. Failure to install, maintain
and/or operate this brewer according to the manufacturer’s instructions may result in conditions
that can cause injury or damage to property. If in any doubt about the serviceability of the brewer
always contact the manufacturer or your own supplier for advice.