Service Manual 1000615 Filtro Jug MF 1000616 Filtro Flask MF 02-05-06
Page 2 of 9
INTRODUCTION
The information provided in this manual is intended to assist in the installation and maintenance and service
of the Manual-Fill versions of the Filtro Filter coffee Brewer. Please read the instructions carefully to prevent
accidents and ensure an efficient installation.
This manual is not a substitute for any safety instructions or technical data affixed to the machine or its
packaging. All information in this manual is current at the time of publication and is subject to change
without notice.
Only technicians or authorised service providers should carry out maintenance of these machines.
The company accepts no responsibility for any damage or injury caused by incorrect or unreasonable
installation and operation.
SAFETY INSTRUCTIONS
Read and keep these instructions.
To protect against electric shock do not immerse mains cord in water or other liquid.
To prevent chafing of the cable, do not let the mains cord hang over the edge of a table or counter; or
touch hot surfaces.
Do not operate any product with a damaged cord, plugs, or after the machine malfunctions or has
been damaged in any manner. If the supply cord is damaged, it must be replaced by the manufacturer
or approved service agent in order to avoid a hazard.
Switch off at the mains (unplug or disconnect from outlet). Allow to cool before removing
components.
The use of non-approved spares and/or accessories may cause damage and/or injuries.
Do not use outdoors.
Do not use the product for anything other than its intended use.
Keep the outside of the coffee maker clean and dry at all times.
