Marco 162 001 1B Instructions For Use Manual Download Page 10

E.C. DECLARATION OF CONFORMITY 

 

Associato AIB
associazione
industriale
bresciana

We confirm that the product: 

This declaration is valid for all products which are produced in accordance with the technical documentation which is 
a part of this declaration. For verification of conformity with regard to the security of electric machines and to the 
Electromagnetic Compatibility the following standards are applied: 

EB60335-2-41:1990 
+A51:1991 

Security of electric machines for the domestic use and similar uses. 
Particular applications of electric  pumps with liquids that do not exceed 35°C. 

EN50081 - 1 / 03.93 

Generic emission standard, residental, commercial and light industry. 

EN50082 - 2 / 03.95 

 

Generic waves immunity standard, industrial environment

EC product marking from: September‘96. 
This declaration is given under the sole responsibility of: 

162 001 1B - UP1/AC 110V  Flexible impeller pump  

Is in conformity with 73/23/EC Directive relating to Low Voltage and
with 2004/108/EC Directive relating to the Electromagnetic Compatibility 

MARCO S.P.A. 

Via Mameli 10 - 2501  Cas enedolo - Brescia - Italy 

4

t

Tel. 030/2134.1 Fax 030/2134.300 

©                    S.p.A.

Summary of Contents for 162 001 1B













Reviews: