Adjusting the Removable Shelves
MBWC24 and MBWC24-2D
Adjusting shelves
For easy access to the storage content, you must pull the shelves approximately 1/3 of its
depth out of the rail compartment. The shelves designed with a notch on each side of the shelf
tracks to prevent bottles from falling.
When removing any of these shelves out of the rail compartment, tilt the shelf as per the dia-
gram and simply pull out, or push in the shelf until it sits on the support brackets securely.
Then simply press the shelf limit pin “A” on both sides and then lift slightly and pull gently to
remove .
Left side
Right side
”A” is shelf limit pin
MWC24-D1 & MWC24-DBLS
To remove the pull out the shelf to support bracket , press the two clips of the roller
bracket in and up, and pull out the shelf following the arrows . To reinstall push in the
shelf alignment with two sides of sliding roller following the arrows .
1
2
2
1
3
1
2
3
16
