The clock automatically scans the time signal at 2.00 a.m. every day to maintain
accurate timing. If reception fail, scanning stops (“ ” on LCD disappear)
The clock can be set to scan the time signal manually by holding “ ” button for
3 seconds. Each reception takes about 5 minutes.
Stop scanning by holding “ ” button for 3 seconds.
Set RCC function to “on” in setting mode, then hold “+” to select the time zone.
There are seven time zones for selectable:
Atlantic – AT, Eastern – E, Central – C, Mountain – M,
Pacific – P, Alaskan – AK, Hawaii – H,
“
” shown on the LCD if it is in Daylight Saving Time Mode
7.2 Manual Time Setting:
In time display mode, hold “MODE” button for 3 seconds to enter Clock/Calendar
setting Mode.
Press “+” or “-” button to adjust the setting and press “MODE” button to confirm
each setting.
(By keeping the “
+
” or “
-
” button pressed, could accelerate the process and reach
the desired value more quickly)
The setting sequence is shown as follow: 12/24Hour, RCC on/off, Time Zone,
Weekday Language, Hour, Minute, Second, Year, Month, Date, DST ON/OFF,
Temperature Unit, Alarm sound duration.
For day of week and month, there are 3 languages available for selection: English,
French, Spanish
Note
:
(1)
All Setting mode will automatically exit in 15 seconds without any adjustment
(2)
Alarm sound duration: there are two options available, “1 minute” and “2
minutes”.
(3)
Second only can be adjusted to 0.
7.3 Daily Alarm Function:
Press “ MODE” button select to view alarm Time, “ALARM TIME” flashes on the
display
When viewing the Alarm Time, hold “MODE” button for 3 seconds to enter alarm