4.2 Outdoor Thermo Sensor
Battery compartment (D3) of thermo sensor is locating behind the back cover,
unscrews the batteries cover to open.
Insert 2 x AAA batteries observing polarity [ “+” and “–“ marks]
5. Installation
5.1 Main Unit
The main unit can be placed onto any flat surface (C3), or wall mounted by the
hanging hole (C1) at the back of the unit.
5.2 Outdoor Thermo sensor
The remote sensor should be securely mounted onto a horizontal surface.
Note:
Transmissions between receiver and transmitter can reach up to 70m in
open area. Open Area: there are no interfering obstacles such as buildings,
trees, vehicles, high voltage lines, etc.
6. RF Transmission
The main unit automatically starts receiving transmission from outdoor thermo
sensor for outdoor temperature after batteries inserted. RF icon “ ” flashes on
the LCD
The thermo sensor unit will automatically transmit temperature signal to the
main unit after batteries inserted.
If main unit failed to receive transmission from outdoor thermo sensor in first 3
minutes after the batteries inserted, “
- - . –
”display on the LCD.
Hold “SEARCH” button for 3 seconds to receive transmission manually.
Press “C/F” button on thermo sensor unit to select temperature to be displayed
in Celsius mode or Fahrenheit mode.
Note
: Buttons will not function while scanning for thermo sensor’s signal unless it
is well received or stopped manually.
7. Time and Alarm Setting
7.1 Radio Controlled Clock:
After batteries inserted, the clock automatically starts to scan the WWVB time
signal. Radio Control Icon“
” flashes on the LCD.
flashes,
Indicating now is receiving
DCF signal
turns on,
Indicating signal received
successfully
disappear,
Indicating signal reception
failed