3
T
roubleshooting
Information
HDMI Control F
unction
Playback
Setup
Connections
Specications
ENGLISH
Before turning the power switch on
•
Check once again that all connections are correct and that there are
no problems with the connection cables.
Power is supplied to some of the circuitry even when the unit is
•
set to the standby mode. When traveling or leaving home for long
periods of time, be sure to unplug the power cord from the power
outlet.
Image persistence (image burn-in)
•
Do not leave the still images of the disc menu, UD9004 menu, etc.,
displayed on the TV screen for long periods. This can result in image
persistence (image burn-in) on the screen.
About Condensation
•
If the UD9004 unit is moved from a cold place to a warm place, or
installed in a room subject to rapid temperature rise from a heater,
etc., condensation (dew) may form on the internal parts of the unit
(operating parts and lenses).
If used in this condition, the UD9004 will not operate correctly and
damage may result. If condensation is formed on the unit, leave the
UD9004 unit for1 to 2 hours with the power OFF before use.
Cautions on using mobile phones
•
Using a mobile phone near this unit may result in noise. If so, move
the mobile phone away from this unit when it is in use.
Moving the unit
•
Be sure to remove a disc, turn off the power and unplug the power
cord from the power outlet. Next, disconnect the connection cables
to other system equipment before moving the unit.
About Care
•
Wipe the cabinet and control panel clean with a soft cloth.
•
Follow the instructions when using a chemical cleaner.
•
Benzene, paint thinner or other organic solvents as well as
•
insecticide may cause material changes and discoloration if brought
into contact with the unit, and should, therefore, not be used.
Sufciently ventilate the place of installation
•
If the unit is left in a room full of the smoke from cigarettes, etc.,
for long periods of time, the surface of the optical pickup could get
dirty, in which case it will not be able to read the signals properly.
Note that the illustrations in these instructions may differ from the
•
actual unit for explanation purposes.
Note:
For proper heat dispersal, do not install this unit in a conned
space, such as a bookcase or similar enclosure.
Cautions on Handling
Cautions on Installation
About Media
Playable Media
Playable Media
Playable
formats/
modes
Playable
region codes
Symbols
Used
in this
Owner’s
Manual
BD-Video
z
1
,
z
2
–
Include region
BD
DVD-Audio
z
1
–
–
DVD-A
DVD-Video
z
1
,
z
2
Include region
ALL
2
DVD-V
DVD-R,
DVD+R
Video
mode,
AVCHD
format
–
DVD
DVD-RW,
DVD+RW
Super Audio
CD
–
–
SA-CD
CD
–
–
CD
CD-R
CD-RW
Discs
z
1 : BD-Video/DVD-Audio/DVD-Video discs may not operate as
described in this manual due to menu structure.
z
2 : The BD player and BD-Video disc, and DVD player and DVD-
Video disc each have their region codes (code assigned for
each region). Playback is not possible if the codes do not
match.
Getting Started
Do not place the UD9004 on an amp or other piece of equipment that
generates heat.
Note
b
b
Wall
b
b
Opening and closing the front panel door
When you want to use the controls behind the front panel door, open
the door by gently pressing on the lower part of the panel. Keep the
door closed when not using these controls.
CAUTION
Be careful not to pinch your ngers between the door and the
•
panel.
