7
BASIC
CONNECTIONS
BASIC
OPERA
TION
TROUBLESHOOTING
OTHERS
NAMES AND
FUNCTIONS
ADV
ANCED
OPERA
TION
ENGLISH
RECALLING A PRESET STATION
TUNER ST6003
1.
1.
1.
Select the desired preset station by pressing
the
F/P
and
TUNING
3
or
4
button on the front
panel.
CLEARING STORED PRESET STATIONS
You can remove preset stations from the memory
using the following procedure.
TUNER ST6003
2.
3.
1.
Recall the preset number to be cleared with
the method described in “Recalling” a preset
station.
2.
Press
the
MEMORY
button on the front panel.
3.
The stored preset number blinks in the display
for 5 seconds. While blinking, press the
CLEAR
button on the front panel.
4.
“
xx CLEAR
” appears on the display to indicate
that the specified preset number has been
cleared.
Note:
To clear all stored preset stations, press and hold the
CLEAR
and the
F/P
buttons on the front panel for
two seconds.
SORTING PRESET STATIONS
TUNER ST6003
If you have stations memorized, and there is a gap in
the sequential order:
I.e. the stations are stored as follows
1)
87.5
MHz
2)
93.1
MHz
3)
94.7
MHz
10)
105.9
MHz
Since there are no stations programmed for presets
4-9, you can have preset 10 become preset 4.
To sort the numbers, press the
TUNING
4
button
while pressing the
MEMORY
button.
“
PRESET SORT
” will appear on the display and
sorting will be done.
NAME INPUT OF THE PRESET STATION.
This function allows the name of each preset channel
to be entered using alphanumeric characters.
Before name inputting, you need to store preset
stations with the preset memory operation.
TUNER ST6003
4.5.
2.5.6.
5.
1.
Recall the preset number to be inputted name
with the method described in “Recalling” a
preset station.
2.
Press
the
MEMORY
button on the front panel
for more than 3 seconds.
3.
The left most column of the station name
indicator fl ashes, indicating the character entry
ready status.
4.
When you press the
TUNING
3
or
4
buttons
on the front panel, alphabetic and numeric
characters will be displayed in the following
order:
A
→
B
→
C ... Z
→
1
→
2
→
3 ..... 0
→
–
→
+
→
/
→
(Blank)
→
A
UP
→
←
DOWN
5.
After selecting the fi rst character to be entered,
press the
MEMORY
button.
The entry in this column is fi xed and the next
column starts to fl ash. Fill the next column the
same way.
To move back and forth between the characters,
press the
F/P
button and press the
TUNING
3
or
4
buttons.
Note:
Unused columns should be fi lled by entering blanks.
6.
To save the name, press the
MEMORY
button
on the front panel for more than 2 seconds.
