Marantz SR7011, Owner'S Manual

Page: 314 / 395

Upgrade (Auro-3D)
.
Sound mode
Channel output
Front
L/R
Center
Surround
L/R
Surround
Back
L/R
Front
Height
L/R
Top Front
L/R
Top Middle
L/R
Top Rear
L/R
Rear
Height
L/R
Surround
Height
L/R
Top
Surround
Front
Dolby
Atmos
Enabled
L/R
Surround
Dolby
Atmos
Enabled
L/R
Back Dolby
Atmos
Enabled
L/R
Subwoofer
Auro-3D S D D D Dz 7 D Dz 8 D
Auro-2D Surround S D D D D
z
1 The applicable sound mode includes “Dolby Surround” and sound modes that have “+Dolby Surround” in the sound mode name.
z
2 The applicable sound mode includes “DTS Neural:X” and sound modes that have “+Neural:X” in the sound mode name.
z 3 A signal for each channel contained in an input signal is output as audio.
z
4 Audio is not output when “Speaker Config.” - “Surr. Back” in the menu is set to “1 spkr”. (
v
p. 235)
z
5 Audio is output from the speakers specified in the “Surround Parameter” – “Speaker Select” settings. (
v
p. 188)
z
6 Audio is output when “Subwoofer Mode” in the menu is set to “LFE+Main”. (
v
p. 242)
z
7 For the best Auro-3D experience Surround Height speakers are recommended, however you may substitute Rear Height speakers from a Dolby Atmos speaker setup in
place of Surround Height speakers.
z 8 This is output if an Auro-3D signal is input and the input signal contains Top Surround.
Contents Connections Playback Settings Tips Appendix
314
Front panel Display Rear panel Remote Index