Marantz SR7009/FN, Service Manual

Page: 29 / 247

Confirmation item FL display Settings Contents of confirmation
A05
HDMI (signal) Path
A 0 5 H D M I
* * * . * d B
Input Source : CBL/SAT
Input Mode : HDMI ( fixed )
Vol.: 60.0 ( -20.0dB )
Amp assign : 9.1ch
MAIN ZONE ON
ZONE2 : OFF
ZONE3 : OFF
·HDMI Input ⇒ Speaker output ( Front L/R )
·HDMI Input ⇒ Preout output ( Front L/R )
(
b
As the input source, you can switch from CBL / SAT to other ones.)
A06
Analog AD (signal) Path
(MAIN ZONE)
A 0 6 A D
* * * . * d B
Input Source : CBL/SAT
Input Mode : Analog ( fixed )
Sound mode: MULTI CH STEREO
Vol.: 60.0 ( -20.0dB )
Amp assign : 9.1ch
Height Speakers =2 Height Speakers
Height Layout = Front Height
Speaker Select : Floor
Speaker Config All Speaker = Small / SW = Yes ( 2CH )
MAIN ZONE ON
ZONE2 : OFF
·Analog input
⇒
Speaker output ( Front L/R, Center, Surround L/R, Surround Back L/R, Front Wide L / R )
· Analog input
⇒
Preout output (Front L/R, Center, Surround L / R, Surround Back L / R,Front Wide L / R,
Subwoofer ( 20Hz ) )
(
b
As the input source, you can switch from CBL/SAT to other ones.)
(
b
The Volume -20dB is at the time of Relative setting. Absolute setting is 60dB.)
A07
Analog Amp Assign (signal) Path
(Amp Assign : ZONE2)
A 0 7 Z 2 A S S
* * * . * d B
Input Source : CBL/SAT
Input Mode : Auto
Sound mode : STEREO
Z2 Source : Source
Z2 Vol : 60.0 ( -20dB )
Amp Assign : 7.1ch + ZONE2
Speaker for ZONE2 : Surround Back
MAIN ZONE : ON
ZONE2 : ON
ZONE3 : OFF
·Analog input
⇒
Speaker output ( Surround Back ( ZONE2) L / R )
·Analog input
⇒
Preout output (ZONE2 L/R)
(
b
As the input source, you can switch from CBL/SAT to other ones.)
(
b
The Volume -20dB is at the time of Relative setting. Absolute setting is 60dB.)
A08
Analog Amp Assign ( signal ) Path
( Amp Assign : ZONE3 )
A 0 8 Z 3 A S S
* * * . * d B
Input Source : CBL/SAT
Input Mode : Auto
Sound mode : STEREO
Z3 Source : Source
Z3 Vol : 60.0 ( -20dB )
Amp assign : 7.1ch + ZONE3
Speaker for ZONE3 : Front Wide
MAIN ZONE ON
ZONE2 : OFF
ZONE3 : ON
·Analog input ⇒ Speaker output Front Wide ( ZONE3 ) L / R
·Analog input ⇒ Preout output ZONE3 L / R
(
b
As the input source, you can switch from CBL/SAT to other ones.)
(
b
The Volume -20dB is at the time of Relative setting. Absolute setting is 60dB.)
A09
Analog Amp Assign (signla) Path
(Amp Assign : ZONE2 / ZONE3 - MONO)
A 0 8 Z 2 / 3 A
* * * . * d B
Input Source : CBL/SAT
Input Mode : Auto
Sound mode : STEREO
Z2 Source : Source
Z2 Vol 60.0 ( -20dB )
Z3 Source : Source
Z3 Vol 60.0 ( -20dB )
Amp assign : 7.1ch + ZONE2/3
Speaker for ZONE2 / 3 : Height1
MAIN ZONE ON
ZONE2 ON
ZONE3 ON
·Analog input ⇒ Speaker output
Height1 L ( ZONE2 MONO )
Height2 R ( ZONE3 MONO )
·Analog input ⇒ Pre OUT output
ZONE2 L/R MONO
ZONE3 L/R MONO
(
b
As the input source, you can switch from CBL / SAT to other ones.)
(
b
The Volume -20dB is at the time of Relative setting. Absolute setting is 60dB.)
A11
Amp Assign (signal ) Path
( Amp Assign : Bi-AMP )
A 1 1 B i A M P
* * * . * d B
Input Source : CBL / SAT
Input Mode : Auto
Sound mode: MULTI CH STEREO
Vol : 60.0 ( -20dB )
Amp assign : 7.1ch (Bi-Amp) - Speaker for Bi-Amp : S.Back
MAIN ZONE ON
ZONE2 OFF
ZONE3 OFF
·Analog input
⇒
Speaker output ( Surround Back L / R ( output from Front ) )
Not check the Pre OUT output.
(
b
As the input source, you can switch from CBL / SAT to other ones.)
(
b
The Volume -20dB is at the time of Relative setting. Absolute setting is 60dB.)
A14
Front Height (signal) Path
A 1 4 F H
* * * . * d B
Input Source : CBL / SAT
Input Mode : Auto
Sound mode: MULTI CH STEREO
Vol : 60.0 ( -20dB )
Amp assign : 11.1ch
Height Speakers = 4Height Speakers
Height Layout = Top Front & Top Rear
Pre-out Channel = Top Rear
Speaker Config >> Front Wide = None
Speaker Select : Floor & Height
MAIN ZONE ON
ZONE2 OFF
ZONE3 OFF
·Analog input
⇒
Speaker output
Height1 L / R ( Top Front output )
·Analog input
⇒
Preout output ( Top Front output Height2 L / R output )
Height1 L / R ( Top Front output )
Height2 L / R ( Top Rear output )
(
b
As the input source, you can switch from CBL / SAT to other ones.)
Pre OUT output
(
b
The Volume -20dB is at the time of Relative setting. Absolute setting is 60dB.)
fig.05a, fig.05b, fig.05c
fig.06a, fig.06b
fig.07
fig.08
fig.09
fig.10
fig.11a, fig.11b
29