Explanatory Photos for DISASSEMBLY
• For the shooting direction of each photos used in this manual, see the photo below.
•
A, B, C and D
in the photo below indicate the shooting directions of photos.
• The photographs with no shooting direction indicated were taken from the top of the unit.
• Photos of SR5014 U are used in this manual.
The viewpoint of each photograph
(Shooting direction : X) [View from the top]
Attention :
When reinserting the Antenna Cable after it has been disconnected, make sure it is facing the direction
shown in
Ⓐ
above.
↓
Shooting direction: C
↓
↑
Shooting direction: D
↑
↑
Shooting direction: A
↑
↓
Shooting direction: B
↓
�
Proceeding :
TOP COVER
→
FRONT ASSY
(1) Remove the screws.
(2) Remove the screws. Cut the wire clamp, then remove the CORD HOLDER and connector.
Remove the FFC.
1. FRONT ASSY
View from the bottom
x8
↑
Shooting direction: A
↑
x2
N1008
CORD HOLDER
CP4400
FFC FFC
N1000
CORD HOLDER
CUT
Before Servicing
This Unit
Electrical
Mechanical
Repair Information
Updating
72
