REMOTE CONTROL connectors
The following functions can be used when this unit is connected to a
Marantz amplifier.
0
Controlling the amplifier through this unit using the HEOS app
0
Synchronizing the power operations of this unit and the amplifier
0
Turning on the power to this unit turns on the power to the amplifier
and switches the amplifier input source to “CD”.
0
Switching this unit to standby mode also switches the amplifier to
standby mode.
0
Transmitting remote control signals received by the amplifier to this unit
and controlling this unit
Next, configure the “Connection” and “Setting”.
0
Some operations may not be possible on some Marantz amplifiers.
o
Connection
Use the supplied remote connector cable to connect the REMOTE
CONTROL IN connector of this unit to REMOTE CONTROL OUT
connector of the amplifier.
o
Setting
Turn the EXTERNAL/INTERNAL switch on the unit to “EXTERNAL”.
0
This setting will disable remote sensor reception of this unit.
0
To operate the unit, point the remote control at the remote sensor of
the amplifier.
0
To use this unit by itself without connecting an amplifier, turn the switch to
“INTERNAL”.
26
