- RC3200 Information
This page contains information that may be important to the dealer in case of a defect. The following information is displayed
on this screen:
• Free memory (in percentage), which gives you an indication on how much memory is left to (further) customize the RC3200;
• Boot version;
• Application version;
• Configuration file.
- Revert
Warning When you revert the RC3200, all customization is lost permanently. You loose all RC3200 settings, defined brands,
learned codes and recorded macros.
By tapping the Revert button the RC3200 will be reverted to the default configuration. Reverting to the original configuration
restores the RC3200 to its initial state. You might have to revert when you notice that scrolling through pages is slowing down.
This might be the case when you have added a lot of commands to the RC3200.
1 Tap the Revert button. A message screen appears to confirm or cancel the revert process.
2 Press OK or Cancel.
- RC3200 Setup Programming Software
If you want to personalize your RC3200 even more beyond its standard programming features,RC3200 Setup Programming
Software is the tool for you to use.
You can find more information and updates of the software on http://www.marantz.com.
RC3200 Setup Programming Software is the visual editor for creating and configuring RC3200 Configuration Files (windowes
file extention NCF) on your computer. An NCF is a file that is used to define the RC3200 behaviour and look for the LCD touch
screen.
Note It is advised to make backup copies of your own configurations. This can be done with RC3200 Setup Programming
Software.
With RC3200 Setup Programming Software you can:
• define the types and brands of your devices;
• generate the Home Page;
• design the page layout and the appearance of buttons;
• configure the behavior of the hard buttons and soft buttons;
• save, duplicate and share NCFs, devices, buttons, bitmaps or codes with another RC3200;
• preview the NCF on the RC3200 emulator;
• download the new configurations to your RC3200 by means of the included serial cable;
1 Plug one end of the serial cable in the serial port on your computer. see picture 1
2 Plug the other end of the serial cable in the serial port on the RC3200.
Note When the RC3200 is connected to the PC, the battery lifetime may be reduced.
Minimum System Requirements
• PC with a Pentium 166 MHz or higher
• Windows 95/98/ME/XP or NT 4.0/2000
• 32 MB of RAM
• 16 MB of free hard disk space
• Free serial port
4-4
TROUBLESHOOTING
