manualshive.com logo in svg

Marantz PMD650, Owner'S Manual

Share
Download
Marantz PMD650 Owner'S Manual Download Page 23

26

ADDITIONAL INFORMATION

ENGLISH

Specifications

DIGITAL AUDIO SYSTEM

System

MiniDisc digital audio system

Disc

MiniDisc

Recording method

Magnetic field variation overwrite

Reading method

Non-contact optical pickup (using semiconductor
laser)

Laser

Semiconductor laser

Laser Diode Properties

Material: GaAIAs

Wavelength: 780 nm

Record/playback time

SP mode (stereo): 74 minutes max.

LP mode (mono): 148 minutes max.

Revolutions

Approx. 400~900 rpm (CLV)

Error Correction

ACIRC (Advanced Cross Interleave Reed-solomon
Code)

Sampling frequency

44.1 kHz (32 kHz and 48 kHz signals converted to 44.1
kHz for recording)

Coding

ATRAC (Adaptive Transform Acoustic Coding)

Modulation System

EFM (Eight-to-Fourteen Modulation)

Number of channels

2 (stereo) or 1 (mono)

Display Messages

Blank Disc

The inserted disc is blank (nothing has been recorded on
it).

No Disc

There is no disc in the MD slot.

Disc Error

The disc loaded in the disc slot is not an audio MD.

Play Only

The inserted MD is designed for playback only (you
cannot record on this disc).

Protected

The record protection on the inserted MD is set to
“protect”.

Can't Edit

Edit operation is not possible.

Input ERR

The track number input during the combine operation
was incorrect.

Impossible

The selected operation is not possible.

Disc Full

Recording is not possible because there is not enough
blank space remaining on the disc.

HIGH DC IN

The DC power voltage is higher than the specified
voltage. When this message appears, the unit writes the
UTOC and then turns itself off automatically.

LOW BATT

The battery voltage is lower than the specified voltage.
When this message appears, the unit writes the UTOC and
then turns itself off automatically.

KEY LOCK

The KEY LOCK control is set to ON. If you wish to
perform an operation, slide the KEY LOCK switch to the
left (OFF).

Reading

The unit is reading the UTOC data.

Writing

The UTOC data is being written to the disc. Do not move
the unit or pull out the AC adaptor. If you do, recorded
material may not be saved normally.

Summary of Contents for PMD650

























Reviews:

No comments

Brands by name

Popular brands

Load more brands