19
ENGLISH
EDITING
Dividing a Track
This function will divide a track into two different tracks.
After dividing the track, the total number of tracks
increases by one and the tracks following the divided
track are renumbered automatically.
1
Press PLAY/PAUSE (
3˜8
) to pause playback at
the point where you want to divide the track.
2
Press EDIT < or > repeatedly until “Divide?” is
displayed, then press ENTER.
“Rehearsal” and “Pos. Ok?” appear alternately in the display
and the unit plays back the divide point (selected in step
1
).
3
If necessary, use
1˜4
and
¢˜¡
to adjust
the divide point.
The divide point can be adjusted from –127 to +128 steps in
either direction (about 0.06 second interval).
4
Press ENTER to divide the track.
“Complete!” appears in the display and the unit returns to
the normal play mode.
To cancel before dividing the track
Press EDIT < or > or STOP (
7
) any time before step
4
.
To divide quickly
1
Start playback.
2
Slide REC/MARK (
¶
) to the right at a point in
which you want to divide the track.
The track number and time are changed automatically.
Notes
• You can also combine the tracks later using the combine
function.
• The disc can only be ejected after completion of writing
UTOC.
• Even during playback, the dividing operation (rehearsal
function) can be carried out.
Combining Tracks
This function will combine two adjacent tracks into one
track. After combining the tracks, the total number of
tracks decreases by one and the tracks following the
combined tracks are renumbered automatically.
1
Press STOP (
7
) to stop playback.
2
Press EDIT < or > repeatedly until “Combine?” is
displayed, then press ENTER.
“Tno = 001” is displayed.
3
Press
1˜4
or
¢˜¡
to select the first
track of the two you want to combine.
“Tno = xxx” is displayed.
4
Press ENTER.
“Rehearsal” and “Track Ok?” appear alternately in the
display and the unit plays back the last 4 seconds of the first
track and the first 4 seconds of the next track.
5
Press ENTER to combine the tracks.
“Complete!” appears in the display and the unit returns to
the normal play mode at the beginning of the first track.
To cancel before combining the track
Press EDIT < or > or STOP (
7
).
If the button is pressed in step
2
or
3
, the unit enters the
stop mode. If the button is pressed in step
4
, the unit
plays back normally.
To combine two tracks quickly
WARNING: The following operation does not request
confirmation before combining the tracks.
1
Press PLAY/PAUSE (
3˜8
) to pause playback
or stop.
2
Press
1˜4
or
¢˜¡
to select the second
track of the two you want to combine.
3
Slide REC/MARK (
¶
) to the right.
The tracks are combined, the track number is erased, and
playback starts from the beginning of the first track.
Notes
• You can also divide the tracks later using the divide
function.
• When the tracks are combined, the title information of the
second track is erased.
• Certain tracks may not be combined. If they are different in
speed mode (SP/LP), SCMS on/off, emphasis on/off, or
tracks are less than 2 seconds.
C
D
A
B
E
B
C
D
A
C
D
A
B
E
B
C
D
A
