Marantz PMD351, Service Manual

Page: 15 / 48

13
6 5 4 3 2 1 0
1 PITCH + TIME One-way mode MEMO STOP/EJECT (REW) (PLAY)
2 PITCH 0 REPEAT
Continuous
mode
RESET (NEXT) STOP (PLAY)
3 PITCH - PROGRAM CASCADE ALC ON (PREV) PLAY/PAUSE (FF)
4 A-B DOLBY-C DOLBY-B DUBB. REC/PAUSE
1. How to enter into the Service Mode
While pressing PROGRAM, STOP/EJECT (CD) and
STOP (TAPE) buttons, press POWER button.
" *** 00 " is diaplayed
" *** " is Version number of the microprocessor.
2. Mode0 (Display : *** 00 )
Status: [FOCUS OFF] [SPINDLE OFF] [RADIAL OFF]
[MUTE ON]
• While pressing and buttons, the sledge moves
toward the outer edge. Release the button makes the
sledge return to the origin.
Press NEXT button to go to Mode 1.
3. Mode 1 (Display : *** 01 )
Status: [FOCUS ON] [SPINDLE OFF] [RADIAL OFF]
[MUTE ON]
• Press NEXT button to go to Mode 2.
• Press PREV button to go to Mode 0.
4. Mode 2 (Display : *** 02 )
Status: [FOCUS ON] [SPINDLE ON] [RADIAL OFF] [MUTE
ON]
• Press NEXT button to go to Mode 3.
• Press PREV button to go to Mode 1.
5. Mode 3 (Display : *** 03 )
Status: [FOCUS ON] [SPINDLE ON] [RADIAL ON] [MUTE
OFF]
• Press PREV button to go to Mode 2.
6. Others
* In the Mode 0 or 1, pressing the number button 3 on the
remote makes the spindle motor rotate and " FrEE " is
displayed. Press the number button 4 to stop rotation.
* In this Service Mode, all of the following button functions
work in any status.
1) Press TIME button, " FL dISP " is displayed. Press
it again then each FL segment lights up one by one.
Press it again then light up all the FL segments. Press
STOP/EJECT button to go to Mode 0
2) Press STOP/EJECT button, " CodE " is displayed.
Then press a button on the unit. The name of the button
is displayed. Pressing a button on the Remote controler
for RC-5 unit display the RC-5 code (Ex. : rc2001 ) of
the button. Press STOP/EJECT (CD) and STOP (CD)
button to go to Mode 0.
Ex.: Press
PITCH +
button,
" 1-6 "
is displayed.
7. Terminating Service Mode
Turn off power to quit Service Mode.
7. SERVICE MODE