6
Recording Instructions
Please use deck B for recording external sources or
dubbing tapes. Note that most cassettes feature a
protective plastic strip which, when removed, will not allow
any recording to be made to the cassette.
Note:
When the plastic strip has been removed, the unit’s
Record
button will not function when attempting to record
to the cassette.
Tip:
To record to a cassette which no longer has a plastic strip, use adhesive tape to cover the
strip opening.
Transferring Tapes to Computer:
1.
Visit
marantzpro.com
to download and install the tape converter software.
2.
Open the software and follow the simple on-screen instructions to transfer your tape to your
computer.
Recording External Source to Tape:
1.
Press
Stop / Eject
on deck B to open the cassette holder.
2.
Insert a blank tape and close the cassette holder.
3.
If recording to a Cr02 tape, press the
Rec Cr02
button.
4.
Press the
Pause
button and then press
Record
.
5.
Play your external source and check the levels on the display. Use the
Rec Level Knob
to
adjust the level of the incoming audio signal.
6.
Press the
Pause
button to begin recording when you are ready.
Tip:
The
Rec Level Knob
can be used to make adjustments to the loudness of the
incoming signal. If the knob is in the center position, the incoming signal will be recorded at
its original volume. Ideally, the recording signal should come close but never hit red in the
level indicator on the display. If the signal is in the red, then turn down the
Rec Level Knob
until it no longer reaches the red. If the signal is too low and not close to the red, turn up the
Rec Level Knob
.
Dubbing Operation:
1.
Insert the tape for playback in deck A.
2.
Insert the tape you wish to record to in deck B.
3.
Press the
Dubbing
button. “Dubbing” will be illuminated on the display.
4.
Select the dubbing speed with the
Hi Sp Dub
button. If the “HI SP DUB” indicator is
illuminated on the display, you will be dubbing in high-speed mode. If the indicator is not lit,
then you will be recording in normal-speed mode.
5.
Press the
Pause
button on deck A, followed by the
Play
button to cue the tape.
6.
Press the
Record
button on deck B.
7.
Press the
Pause
button on deck A to release pause mode. The unit will automatically start
the dubbing operation.
8.
To stop dubbing, press the
Stop / Eject
button of deck B.
Please note:
Do not change dubbing speed while dubbing is in progress.
SIDE 2
PLASTIC
STRIP
SIDE 1
PLASTIC
STRIP
Summary of Contents for PMD-300CP
Page 2: ......